Navigation

  • English

Konstantin Lomakin, M. Sc.

  • Organisation: Department Elektrotechnik-Elektronik-Informationstechnik (EEI)
  • Abteilung: Lehrstuhl für Hochfrequenztechnik
  • Telefonnummer: ++49 9131 85-28690
  • Faxnummer: ++49 9131 85-27212
  • E-Mail: konstantin.lomakin@fau.de
  • Adresse:
    Cauerstr. 9
    91058 Erlangen
    Raum 05.239

Scholar profile

Neueste Veröffentlichungen

  • K. Lomakin, L. Engel, J. Fleischmann and G. Gold, "Additively Manufactured Wavemode Transition for Broadband E-Band Applications", in Proceedings of the 2021 IEEE/MTT-S International Microwave Symposium (IMS), Atlanta, GA, Juni, 2021.
  • K. Lomakin, M. Sippel, K. Helmreich and G. Gold, "3D Printed Slotted Waveguide Array Antenna for D-Band Applications", in Proceedings of the 2021 15th European Conference on Antennas and Propagation (EuCAP), Düsseldorf, März, 2021.
  • S. Neermann, J. Franke, M. Sippel, K. Lomakin and G. Gold, "RF Characterization of the Homogeneity of Sintered Micro- And Nanoparticle Silver Inks for Printed Electronics", in Proceedings of the 2021 14th International Congress: Molded Interconnect Devices, MID 2021 - Proceedings, Virtual, Nurnberg, DEU, Februar, 2021.
  • K. Lomakin, L. Klein, M. Sippel, K. Helmreich and G. Gold, "3D-Printed 3 dB Hybrid Coupler for D-Band Applications", in Proceedings of the 2020 50th European Microwave Conference (EuMC), Utrecht, Januar, 2021.
  • L. Klein, K. Lomakin, M. Sippel, K. Helmreich and G. Gold, "Additively Manufactured Six-Port for mmWave Applications", in Proceedings of the 2020 50th European Microwave Conference (EuMC), Utrecht, Januar, 2021.
  • K. Lomakin, L. Wang, A. Job, R. Süß-Wolf, J. Franke, K. Helmreich and G. Gold, "Additive Manufacturing of Coplanar Transmission Lines on Alumina Substrate up to 24 GHz using Laser Assisted Selective Metallization", in Proceedings of the 2020 50th European Microwave Conference (EuMC), Utrecht, Januar, 2021.
  • K. Lomakin, M. Sippel, K. Helmreich and G. Gold, "Design and Analysis of 3D Printed Slotted Waveguides for D-Band using Stereolithography and Electroless Silver Plating", in Proceedings of the 2020 IEEE/MTT-S International Microwave Symposium (IMS), Los Angeles, CA, Juni, 2020.
  • K. Lomakin, K. Helmreich and G. Gold, "Using Group Velocity for Correct Determination of Phase Coefficient Without Initial Phase Assumption", in Proceedings of the 2020 IEEE 24th Workshop on Signal and Power Integrity (SPI), Cologne, Mai, 2020.
  • I. Ullmann, K. Root, K. Lomakin, G. Gold, M. Gottinger, K. Helmreich and M. Vossiek, "Circular Polarization Millimeter-Wave SAR Imaging using 3D-Printed Helix Antennas", in Proceedings of the SPIE Security + Defense Forum, Edingburgh, September, 2020.
  • K. Lomakin, M. Sippel, I. Ullmann, K. Helmreich and G. Gold, "3D Printed Helix Antenna for 77 GHz", in Proceedings of the 2020 14th European Conference on Antennas and Propagation (EuCAP), Copenhagen, Denkmark, März, 2020.
  • K. Lomakin, S. Herold, L. Ringel, J. Ringel, D. Simon, M. Sippel, A. Sion, M. Vossiek, K. Helmreich and G. Gold, "SLA Printed 3D Waveguide Paths for E-Band using Electroless Silver Plating", IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 9, no. 12, pp. 2476-2481, Dezember, 2019.
  • K. Lomakin, R. Guschlbauer, F. Osmanlic, Z. Fu, M. Sippel, K. Helmreich, C. Körner, M. Vossiek and G. Gold, "3D Printed Copper Waveguides by Selective Electron Beam Melting Process for E-Band", in Proceedings of the EuMW 2019, Paris, Oktober, 2019.
  • M. Sippel, K. Lomakin, M. Ankenbrand, M. Petersen, J. Franke, K. Helmreich, M. Vossiek and G. Gold, "3D-Printed Bowtie Filter Created by High Precision NanoJet System Combined with Novel Printing Strategy", in Proceedings of the 28th Conference on Electrical Performance of Electronic Packages and Systems (EPEPS 2019), Montreal, Kanada, Oktober, 2019.
  • K. Lomakin, L. Klein, L. Ringel, J. Ringel, M. Sippel, K. Helmreich and G. Gold, "3D Printed E-Band Hybrid Coupler", IEEE Microwave and Wireless Components Letters, vol. 29, no. 9, pp. 580-582, September, 2019.
  • K. Lomakin, S. Herold, D. Simon, M. Sippel, A. Sion, M. Vossiek, K. Helmreich and G. Gold, "3D Printed Slotted Rectangular Hollow Waveguides", in Proceedings of the IEEE MTT-S International Microwave Symposium, Boston, USA, Juni, 2019., Boston USA, Juni, 2019.
  • U. Arz et al., "Best Practice Guide for Planar S-Parameter Measurements using Vector Network Analysers : EMPIR - 14IND02 PlanarCal", April, 2019.
  • G. Gold, K. Lomakin, K. Helmreich and U. Arz, "High-Frequency Modeling of Coplanar Waveguides Including Surface Roughness", Advances in Radio Science, no. 17, April, 2019.
  • K. Lomakin, M. Ankenbrand, M. Sippel, J. Franke, K. Helmreich and G. Gold, "Nanojet 3D Printed Coplanar Waveguides on Flexible Polyimide Substrate up to 24 GHz", in Proceedings of the 1st IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS 2019), Glasgow, 2019.
  • K. Lomakin, T. Pavlenko, M. Sippel, G. Gold, T. Weidner, K. Helmreich, M. Ankenbrand and J. Franke, "3D Printed Helix Antenna", in Proceedings of the European Conference on Antennas and Propagation (EUCAP), London, GB, 2018.
  • K. Lomakin, D. Simon, M. Sippel, G. Gold, K. Helmreich, E. Seler, Z. Tong and R. Reuter, "3D Printed Slotted Waveguide Array Antenna for Automotive Radar Applications in W-Band", in Proceedings of the 48th European Microwave Conference (EuMW 2018), 2018.
  • M. Köppel, M. Deckelmann, M. Sippel, K. Lomakin, S. Werzinger, G. Gold, K. Helmreich and B. Schmauß, "Using coherent optical frequency domain reflectometry to assist the additive manufacturing process of structures for radio frequency applications", in Proceedings of the SPIE Optics + Photonics: Optical Engineering + Applications, San Diego, US, 2018.
  • K. Lomakin, T. Pavlenko, M. Sippel, G. Gold, K. Helmreich, M. Ankenbrand, N. Urban and A. Franke, "Impact of Surface Roughness on 3D printed SLS Horn Antennas", in Proceedings of the European Conference on Antennas and Propagation (EUCAP), 2018.
  • K. Lomakin, M. Sippel, G. Gold, J. Fröhlich, K. Helmreich, M. Ankenbrand and J. Franke, "Low reflective aerosol Jet printed broadband matched load up to 67 GHz", in Proceedings of the German Microwave Conference, 2018.
  • K. Lomakin, G. Gold and K. Helmreich, "Analytical Waveguide Model Precisely Predicting Loss and Delay Including Surface Roughness", IEEE Transactions on Microwave Theory and Techniques, 2018.
  • M. Ankenbrand, J. Franke, K. Lomakin, T. Pavlenko, M. Sippel, G. Gold, T. Weidner, D. Weiß and K. Helmreich, "Erzeugung von 3D-Funktionsstrukturen fuer Hochfrequenzanwendungen durch Druckverfahren", PLUS - Produktion von Leiterplatten und Systemen, 2018.
  • K. Lomakin et al., "Evaluation and Characterization of 3D Printed Pyramid Horn Antennas utilizing different Deposition Techniques for Conductive Material", IEEE Transactions on Components, Packaging and Manufacturing Technology, pp. 1-1, 2018.
  • M. Ankenbrand, M. Scheetz, J. Franke, K. Lomakin, M. Sippel, G. Gold and K. Helmreich, "Generation of 3D Functional Structures for High- Frequency Applications by Printing Technologies", in Proceedings of the 2018 13th International Congress Molded Interconnect Devices (MID), 2018.
  • K. Lomakin, M. Sippel, G. Gold, J. Ringel, D. Weiß, K. Helmreich, M. Ankenbrand and J. Franke, "Substituting bond wires by additively manufactured interconnections", in Proceedings of the German Microwave Conference, 2018.
  • M. Sippel, K. Lomakin, G. Gold and K. Helmreich, "Characteristics of Anisotropic Conducting Polymers Suggest Feasibility of Test Fixtures up to 110 GHz", Electronics, 2017.
  • M. Sippel, K. Lomakin, G. Gold, T. Reitberger, S. Neermann and K. Helmreich, "Simple Approach for brief RF Characterization of thin 3D printable Dielectrics", in Proceedings of the 21st IEEE Workshop on Signal and Power Integrity (SPI 2017), Baveno, IT, 2017.